Heavy Duty Mounting Kit PX
Professional light for professional work
With the OSRAM LEDriving Professional Series PX working lights portfolio, it is now possible to find exactly the right lighting for a wide range of special professional tasks and applications. Additionally, they can be mounted in three different ways: Direct mounting, flexible standard mounting, and heavy-duty mounting. OSRAM has developed specially designed mounting kits and a cable with DT-connector. The LEDriving Heavy Duty Mounting Kit PX is compatible with all OSRAM LEDriving working lights of the Professional Series PX. It can be mounted to the vehicle with only two screws, it is quick and easy to mount, and this also allows a faster and easier installation of the LEDriving working lights Professional Series (PX). All components of the mounting kit are made of stainless steel, it has a vibration resistance of at least 12g rms and is therefore specially designed for use on heavy-duty vehicles and is particularly robust and resistant. In addition, the bracket can be adjusted to a tilt angle of up to +/- 30 degrees to direct the light of the working lights where it is needed. OSRAM provides a 5-year guarantee on these products1)2)
1) Additional working lights without ECE approval for use as work lights are approved for use on any vehicle according to German Road Traffic Licensing Regulations (StVZO) §52 (7). However, they must not be used and switched on while driving. In addition, individual special regulations, and laws of countries outside Germany must be observed.
2) For precise conditions refer to: www.osram.com/am-guarantee
1) Additional working lights without ECE approval for use as work lights are approved for use on any vehicle according to German Road Traffic Licensing Regulations (StVZO) §52 (7). However, they must not be used and switched on while driving. In addition, individual special regulations, and laws of countries outside Germany must be observed.
2) For precise conditions refer to: www.osram.com/am-guarantee
Heavy Duty mounting Kit
Particularly strong and resistant bracket for the installation of the LEDriving working lights Professional Series PXПростая установка
The bracket can be fixed to the vehicle with two screwsMatrix Portfolio
Suitable for all PX working lights. Therefore, a vehicle-specific lighting set-up can be put together individually. Mix & match. Vary and combine5-летняя гарантия OSRAM
OSRAM products are innovative and technologically high-quality products that are carefully tested and subject to the strict monitoring undertaken by the OSRAM quality assurance systemТехнические данные
Информация о продукте
Применение (категория и специфика)
Рабочий свет
Классификация
Номер заказа
LEDPWL ACC 102
Размеры и вес
Длина
450 mm
Высота
35 mm
Ширина
430 mm
Вес продукта
30500 g
Срок службы
Гарантия
5 years
Дополнительные данные
Соединение с лампой
Screw-Connection
Условия поставки
Код заказа
73269098900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
23-02-2024
Primary Article Identifier
4062172294782
Declaration No. in SCIP database
In work
Информация об упаковке
EAN |
тип |
Штук |
Размеры |
Масса |
Объем |
|---|---|---|---|---|---|
| 4062172294782 |
FS
| 1 | 94mm x 40mm x 130mm | 325.00g | 0.48дм³ |
| 4062172294799 |
VS
| 30 | 576mm x 213mm x 145mm | 10004.00g | 17.79дм³ |
Загрузки
Технические листы
Информация о линейке продуктов
With the OSRAM LEDriving Professional Series PX working lights portfolio, it is now possible to find exactly the right lighting for a wide range of special professional tasks and applications. Additionally, they can be mounted in three different ways: Direct mounting, flexible standard mounting, and heavy-duty mounting. OSRAM has developed specially designed mounting kits and a cable with DT-connector. The LEDriving Heavy Duty Mounting Kit PX is compatible with all OSRAM LEDriving working lights of the Professional Series PX. It can be mounted to the vehicle with only two screws, it is quick and easy to mount, and this also allows a faster and easier installation of the LEDriving working lights Professional Series (PX). All components of the mounting kit are made of stainless steel, it has a vibration resistance of at least 12g rms and is therefore specially designed for use on heavy-duty vehicles and is particularly robust and resistant. In addition, the bracket can be adjusted to a tilt angle of up to +/- 30 degrees to direct the light of the working lights where it is needed. OSRAM provides a 5-year guarantee on these products1)2)
1) Additional working lights without ECE approval for use as work lights are approved for use on any vehicle according to German Road Traffic Licensing Regulations (StVZO) §52 (7). However, they must not be used and switched on while driving. In addition, individual special regulations, and laws of countries outside Germany must be observed.
2) For precise conditions refer to: www.osram.com/am-guarantee
1) Additional working lights without ECE approval for use as work lights are approved for use on any vehicle according to German Road Traffic Licensing Regulations (StVZO) §52 (7). However, they must not be used and switched on while driving. In addition, individual special regulations, and laws of countries outside Germany must be observed.
2) For precise conditions refer to: www.osram.com/am-guarantee